Wheel bearing nut for front offside hub. This the left hand threaded nyloc nut for the offside front wheel bearing assembly and was originally supplied by the TVR factory with a YELLOW nyloc insert.

Wheel bearing nut for front nearside hub.This the right hand threaded nyloc nut for the offside front wheel bearing assembly and was originally supplied by the TVR factory with a blue nyloc insert.

Wheel bearing seal for front of Chimaera and Griffith. Note 2 are required per hub.

Righthand side front hub assembly. Sometimes known as an upright or a knuckle, this is the O/S (RH) complete hub for Chimaera and Griffith model.

Lefthand side front hub assembly. Sometimes known as an upright or a knuckle, this is the N/S (LH) complete hub for Chimaera and Griffith model.

Track rod end for Chimaera, Griffith and V8S. We have sourced OE quality suspension ball joints from a UK supplier and are able to offer a 2 year warranty on this part.

Upper ball joint for all Cerbera, Griffith, Chimaera, T350, Tamora, Tuscan and Sagaris. Due to the elongated mounting slots it is strongly recommended that the steering geometry is re-aligned as the camber will have changed after fitting new upper balljoints. We have sourced OE quality suspension ball joints from a UK supplier and are able to offer a 2 year warranty on this quality part.

Lower ball joint for Chimaera and Griffith and S Series. The current aftermarket front lower ball joint (C0036) being offered for the TVR Chimaera and Griffith models does not have the correct articulation for the suspension movement. This will overstress the ball pin which will lead to failure of the ball joint. This ball joint has now been remanufactured to a higher spec than the OE balljoint, using high spec CNC machines, materials and comes complete with a lock nut. This joint fully replicat

Track rod measuring 336mm in total length. Track rods for the later TVRs are fundamentally all the same part but with slight variations in overall length and length of thread. This track rod is for the TVR Chimaera, Griffith, Cerbera and early Tuscan but please check length before ordering due to changes on individual cars. We have sourced OE quality suspension ball joints from a UK supplier and is able to offer a 2 year warranty on this part. This track rod is supplied with the correct lock nut

Steering rack gaiter kit for all TVR manual steering racks. Kit contains 2 gaiters and cable ties to secure.

Steering rack gaiter kit for all TVR power steering racks. Kit contains 2 gaiters and cable ties to secure.

Anti-roll bar bush for standard 22mm front anti-roll bar on TVR S Series, Cerbera Speed 6, Griffith and Chimaeras. The V8 Cerberas had a 25mm anti roll bar and use TVR C0162 bush

Uprated anti-roll bar bush in polyurethane for standard 22mm front anti-roll bar on TVR Cerbera, Griffith and Chimaeras.

Standard TVR left-hand side upper front wishbone to fit Griffith and Chimaera. Typically fairly strong but can be damaged by heavy kerbing or accident. Wishbones on Chimaeras and Griffiths can often require replacement due to severe corrosion. Replacement wishbones have superior corrosion resistance as they are grit blasted prior to epoxy coating.These wishbones take a pair of TVR C0200 bushes.

Standard TVR right-hand side upper front wishbone to fit Griffith and Chimaera. Typically fairly strong but can be damaged by heavy kerbing or accident. Wishbones on Chimaeras and Griffiths can often require replacement due to severe corrosion. Replacement wishbones have superior corrosion resistance as they are grit blasted prior to epoxy coating. These wishbones take a pair of TVR C0200 bushes.

Standard TVR left-hand side lower front wishbone to fit Griffith and Chimaera. Typically fairly strong but can be damaged by heavy kerbing or accident. Wishbones on Chimaeras and Griffiths can often require replacement due to severe corrosion. Replacement wishbones have superior corrosion resistance as they are grit blasted prior to epoxy coating.

Standard TVR left-hand side upper front wishbone to fit Griffith and Chimaera. Typically fairly strong but can be damaged by heavy kerbing or accident. Wishbones on Chimaeras and Griffiths can often require replacement due to severe corrosion. Replacement wishbones have superior corrosion resistance as they are grit blasted prior to epoxy coating.These wishbones take a pair of TVR C0200 bushes.

Original Pipercross luftfilter till Griffith / Chimaera. Pris: 405:-

Original luftfilter till Griffith

Passar 350i, 400i och SEAC.

Passar Griffuth / Chimaera 4.0 till 5.0.

Passar Cerbera, Tuscan, T350, Tamora och Sagaris med Speed Six.

Passar Griffith / Chimarea med serpentinmotor utan AC.

Passar Cerbera, Tuscan.

Finns till 4 och 4,5 liters samt 5 liters V8. Ange motorstorlek.

Adapter mellan Jaguar Salisbury diff och original Triumph TR6 drivaxlar på TVR 3000M/Taimar.

ACT Performance 45mm insugningstrattar i kolfiber för TVR RV8 5.0 liter. Tester visar en ökning av vridet med 10lb ft och 9bhp.

Mark Adams Tornado Chip för Lucas Cux14 både flapper & hotwire. Pris:

Wilwood bromskit fram till Griffith / Chimaera. Komplett med 2-delars 298mm ventilerade skivor, 4-kolvsok, stålomspunna slangar, bromsbelägg & monteringskit.

Droplink till krängningshämmaren fram. Passar Griffith / Chimaera.

Droplink till krängningshämmaren bak. Passar Griffith / Chimaera.

Leven justerbara pedaler. Passar Griffith / Chimaera o Cerbera.

Snyggt aluminiumlock till styrservobehållaren. Passar Griffith, Chimaera m fl.

GAZ Gold Pro komplett med fjäder. Pris: 1.720:-/st

GAZ Gold till TVR Tasmin, TVR 350i, 400SE, 450SE. Ej SEAC eller Wedge med SEAC modifierad framvagn.

Ny panel i valnötsrotfanér. Passar Chimaera mk1. Pris: 2.900:-

lampglas för högertrafik, passar Chimaera och Cerbera.

Reflektor för högertrafik, passar Chimaera och Cerbera.

Komplett ombyggnadskit av strålkastarna till Chimaera utan modifiering av karossen får utseendet av Chimaera Mk3.

Rengöringscreme 250ml.

Läderbalsam, 250ml

Läderbalsam som är vattenfrånstötande, passar bra till öppna bilar samt skinnkläder.